Prodoct Informations

The Vigor2762 Series is VDSL2/ADSL2+ modem/router with Firewall and VPN integrated. It provides 1 RJ-11 WAN port for connecting to DSL line directly, the embedded DSL modem is compatible with all the common VDSL and ADSL modulations. One the LAN side is a 4-port 10/100/1000Base TX LAN RJ-45 switch, of which the 4th port can be configured as a WAN port if you need an Ethernet WAN instead, or you may set up the Ethernet WAN as a backup link. There are also 2 USB ports, to which 3G/4G USB modem can be attached to add backup wireless connectivity.

• VDSL2/ADSL2+ Modem/Router
• Compatible with variants of ADSL and VDSL and supports auto fall-back
• 4 Gigabit Ethernet LAN Port, LAN port 4 can be configured as WAN
• 2 USB ports for 3G/4G modem or extra storage
• 2 Simultaneous VPN Tunnels & Maximum 2 SSL VPN Tunnels
• VoIP function with dual FXS port (Vac model)
• SPI Firewall with Content Filtering
• Bandwidth Management & Intelligent VoIP QoS to optimize call quality
• Act as wireless controller for up to 2 VigorAPs
• Compliant with Central Management Software VigorACS2

Hardware
Interface    

• 1 x RJ-11 WAN port
• 4 x GbE RJ-45 LAN port (Port 4 can be configured as WAN 2)
• 2 x USB 2.0 port
• 2 FXS RJ-11 (Vac model)
• Factory Reset Button
• Power On/Off Switch

Power    

• DC 12V @2A
• Max. Power Consumption: 24 watts

Temperature    

• Operating: 0°C ~ 45°C
• Storage: -25°C ~ 70°C

Humidity    

• Operating: 10% ~ 90% (non-condensing)

Dimension (mm)    

• 207 (L) x 131 (W) x 42 (H)

WAN
VDSL    

• G.993.1 (VDSL)
• G.993.2 (VDSL2)
• G997.1
• DSL Forum: TR-114
• Band Plan: G.997
• VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
• OLR, UPBO, DBPO, US0
• Vetoring
• Loop diagnostic mode

ADSL    

• ANSI T1.413
• G.992.1 G.dmt
• G.992.2 G.lite
• G.992.3 (ADSL2)
• G.992.3 Annex M/J (ADSL2)
• G.992.5 (ADSL2+)
• G.992.5 Annex M/J (ADSL2+)

Network Access    

• PPPoE
• PPPoA
• MPoA
• 802.1Q VLAN Tagging
• Multi-PVC for Triple-Play
• PPPoE Pass-Through
• MPoA Bridge

IPv4    

• PPP Client
• DHCP Client
• Static IP
• PPTP/L2TP

IPv6    

• PPP
• DHCPv6 Client
• Static IPv6
• TSPC
• AICCU (AYIYA/Heartbeat)
• 6rd
• 6in4 Static Tunnel

Failover    

• WAN 2 Backup
• 3G/4G Backup

Connectivity Detection    

• ARP
• Ping Probe

LAN Managment
VLAN    

• Up to 8 VLAN
• 802.1Q Tag-based VLAN
• Port-based VLAN

DHCP Server    

• Up to 2 IP Subnet
• Bind-IP-to-MAC
• Custom DHCP Option

DNS Control    

• Local Name Server
• Conditional DNS Forwarding

Hotspot Portal    

• Authentication by Click-Through, Social Login, and SMS PIN
• Custom Portal Page
• URL Redirection
• Walled-Garden

Routing
Static Route    

• 20 IPv4 Static Routing Rules
• 40 IPv6 Static Routing Rules
• Inter-VLAN Routing

Dynamic Routing    

• RIP v1/v2

Policy-Based Routing    

• 50 Route Policy
• Criteria: Protocol, Source IP, Destination IP, Destination Port
• Failover options

VPN
Performance    

• Up to 2 concurrent tunnels
• Up to 2 concurrent SSL VPN

Protocols    

• PPTP, L2TP, IPsec, L2TP over IPsec, SSL, IKEv2
• LAN-to-LAN VPN
• Teleworker-to-LAN VPN

Encryption    

• MPPE 40/128 bit
• Hardware-based AES/DES/3DES

Authentication    

• PAP, CHAP, MS-CHAP, MS-CHAPv2
• MD5, SHA-1
• Pre-Shared Key, Digital Signature (X.509)
• mOTP

Advanced    

• Hub-and-Spoke Topology support
• NAT-Traversal (NAT-T)
• Dead Peer Detection (DPD)

Firewall
 NAT    

• One-to-One Port Redirection
• Range-to-Range Port Redirection
• Open Ports
• Port Triggering
• DMZ Host
• ALG: SIP, RTSP, FTP, TFTP, H.323
• VPN Pass-Through: PPTP, L2TP, IPsec
• UPnP

Firewall Filter    

• IP-based Firewall Policy
• User-based Firewall Policy
• Object-based Configuration
• Schedule Enable/Disable

Content Filtering    

• URL Keyword Filtering
• Category Filtering (subscription required)
• DNS Keyword Filtering
• Web Features Filtering

Attack Protection    

• DoS Defense

Bandwidth Management
Bandwidth Management    

• Session Limit
• Bandwidth Limit
• IP-Based Policy
• Scheduled Enable/Disable

 Quality of Service    

• Layer 3 QoS (TOS/DSCP)
• Layer 2 QoS (802.1p)
• 4-Level Priority with user-defined classification
• Bandwidth Borrowing
• Guaranteed bandwidth for VoIP traffic
• APP QoS

Network Features
Network Features    

• Dynamic DNS
• Bonjour
• IGMP Proxy
• IGMP Snooping
• SMB File Sharing

User Authentication    

• Local User Database
• RADIUS Server

Wireless LAN
Standards    

• 802.11b/g/n (2.4G)
• 802.11 a/n/ac (5G)

SSID    

• Up to 4 SSID per radio
• SSID-based 802.1Q VLAN

Radio Management    

• Auto Channel Selection
• Auto Channel Width (2.4G)
• Wi-Fi Scheduling

Security    

• WEP, WEP-802.1x, WPA-PSK, WPA-802.1x, WPA2-PSK, WPA2-802.1x
• Hidden SSID
• Client Isolation
• Access Control per SSID
• WPS

Advanced    

• AirTime Fairness Band Steering
• WMM

WDS    

• Bridge
• Repeater

Management
Configuration    

• Web Interface: HTTP, HTTPS
• Command-Line Interface: Telnet, SSH
• TR-069 via VigorACS
• Config File Export & Import
• Compliant with the config file exported from Vigor2760

F/W Upgrade    

•  TFTP, HTTP, TR-069

Admin Access Control    

• 2-level Administration Privilege
• Access from the Internet
• Access List

Monitoring    

• Dashboard
• Syslog
• SMS/E-mail Alert
• TR-069 via VigorACS
• SNMP v2, v2c, v3

Central Management    

• Wireless Controller for up to 2 VigorAP